spec no: dsag8876 rev no: v.2 date: may/29/2007 page: 1 of 5 approved: wynec checked: joe lee drawn: y.l.li er p: 1351000558 surface mount display preliminary spec part number: ACSA08-51SURKWA hyper red features z 0.8inch digit height. z low current operation. z excellent character appearance. z i.c. compatible z mechanically rugged. z gray face,white segment. z package: 200pcs/ reel z moisture sensitivity level : level 4. z rohs compliant. description the hyper red source color devices are made with dh ingaalp on gaas substr ate light emitting diode. package dimensions& internal circuit diagram notes: 1. all dimensions are in millimeters (inches), tolerance is 0.25(0.01")unless otherwise noted. 2. specifications are subject to change without notice. 3. the gap between the reflector and pcb shall not exceed 0.25mm.
spec no: dsag8876 rev no: v.2 date: may/29/2007 page: 2 of 5 approved: wynec checked: joe lee drawn: y.l.li er p: 1351000558 selection guide note: 1. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (ucd) [1] @ 10ma min. typ. ACSA08-51SURKWA hyper red (ingaalp) white diffused 18000 61000 common anode, rt. hand decimal. description symbol parameter device typ. max. units test conditions peak peak wavelength hyper red 650 nm i f =20ma d [1] dominant wavelength hyper red 635 nm i f =20ma ? 1/2 spectral line half-width hyper red 28 nm i f =20ma c capacitance hyper red 35 pf v f =0v;f=1mhz v f [2] forward voltage hyper red 1.95 2.5 v i f =20ma i r reverse current hyper red 10 ua v r =5v parameter hyper red units power dissipation 75 mw dc forward current 30 ma peak forward current [1] 185 ma reverse voltage 5 v operating / storage temperature -40c to +85c
spec no: dsag8876 rev no: v.2 date: may/29/2007 page: 3 of 5 approved: wynec checked: joe lee drawn: y.l.li er p: 1351000558 hyper red ACSA08-51SURKWA
spec no: dsag8876 rev no: v.2 date: may/29/2007 page: 4 of 5 approved: wynec checked: joe lee drawn: y.l.li er p: 1351000558 ACSA08-51SURKWA recommended soldering pattern (units : mm; tolerance: 0.15) reel dimension tape specifications (units : mm)
spec no: dsag8876 rev no: v.2 date: may/29/2007 page: 5 of 5 approved: wynec checked: joe lee drawn: y.l.li er p: 1351000558 packing & label specifications ACSA08-51SURKWA
|
